Exterior Wood Primer is a water-based primer for priming surfaces such as façades, windows, fences and carports. The product protects the wood, as well as enhancing adhesion and durability of a subsequent surface treatment. Exterior Wood Primer is very well suited for fir, accoya, larch, pine, oak and pressure-impregnated wood.
Clean the surface with WOCA Exterior Wood Cleaner. The surface must be completely dry and free of dust and dirt. New wood should be treated as soon as possible. On previously-treated wooden surfaces, remove old loose paint and oil.
The treatment with Exterior Wood Primer must be performed in dry weather, at a temperature between 15-30° C. Avoid direct sunlight and intense heat. Wood humidity must not exceed 17%.
Shake the container well.
Apply Exterior Wood Primer undiluted, with a brush or roller. It is important that the product is applied thoroughly and evenly. Start with the end sections of the wood.
NB: Exterior Wood Primer is a pre-treatment product, so the surface must then be treated with WOCA Exterior Wood Oil or paint within 14 days. Make sure that you have properly sealed the container after use.
Check the treated surfaces annually. Repair any damage immediately. Optimum durability is achieved by regular cleaning and correct treatment, depending on the construction, the condition of the wood and wind and weather.
|Solid content||Approx. 10 %|
|Declaration:||Water, vegetable oil components. Contains propiconazole. Contains propiconazole which may produce an allergic reaction.|
|Fully hard||24 hours|
|Mixing ratio||Use undiluted|
Long angled brush 70mm, article no. 599600
Patio scrubber, article no. 599601
Telescopic rod, article no. 599651
Paint roller rod, article no. 599650
Paint roller, article no. 88004
|Cleaning of tools:||With water|
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Shelf life||3 years|
|Storage||+ 10-30°. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.|