Invisible 2K Lacquer is a high-quality water-based ultra-matt floor lacquer that has been specially developed as a lacquer when a light, untreated appearance is desired. The lacquer is based on a polyurethane binding agent, which will leave the surface with a texture resembling newly-sanded wood. The add-in hardening agent is an isocyanate-free hardener. The floor lacquer is indoor climate labelled and thus assures a good working environment during application, as well as a comfortable indoor climate afterwards.
It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time.
For the final sanding to bare wood, use grit 120-150 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. The floor should be completely dry before application of Invisible 2K Lacquer.
Apply a coat of undiluted Invisible 2K Lacquer without hardener with a paint roller or brush and leave the floor to dry for 2-3 hours. Apply the second coat of lacquer and leave the surface to dry until next day. The floor can be sanded after 12 hours.
Sand the surface with grit 150-200 and vacuum clean the surface thoroughly.
Mix WOCA 2K Hardener with the lacquer and shake thoroughly before use. Leave the mixture to stand for ten minutes before use, to allow the hardener to activate.
Apply the final coat of undiluted Invisible 2K Lacquer.
The freshly-lacquered floor is suitable for cautious use after approx. 12 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of lacquer. The floor will be ready for normal use after approx. 8 days, after which rugs etc. can be placed on the floor.
NB: Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.
|Solid content||Approx. 34%|
|Fully hard||8 days. Wait 8 days before covering with carpets and washing.|
|Viscosity||Approx. 34 sec.|
|Mixing ratio||100 ml hardener to 5 L lacquer|
Lacquer Application Roller, 11 mm luv, article no. 88003
Paint roller handle, 25mm, article no. 599650
Wool Pad, article no. 596051
Blue Pad Holder, article no. 399710
|Pot life||The mixture must be used within 5 hours, as the hardener loses its effect afterwards.|
|Disposal||Empty containers and residues to be disposed of according to local regulations.|
|Shelf life||3 years|
|Storage||+ 10-25°C. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.|