Maintenance Oil

Item number:

Revitalises oil-treated wood

  • Makes oiled floors even more durable 
  • Highlights the glow and the grain structure of the wood 
  • Gives the wood a beautiful, breathable surface
  • Indoor climate certified
  • Easy to apply

*The wood sample is shown on oak

25 ML
750 ML
1 L
2.5 L
5 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Vegetable oil components, isoparaffin, pigments.

VOC:

490 g/l, maximum VOC content (A/f (SB)): 700 g/l.

Density:

0.85-0.90 g/ml.

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colours:

Natural, White

Cleaning of tools:

Use WOCA Solvent or turpentine

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L, 2.5 L

Viscosity:

15-20 Sec. DIN Cup 4

Dilution:

Undiluted

Odour:

Characteristic

Solid content:

40-50%

Drying time when machine polished:

3-4 hours at 20°C

Fully hard:

3 days at 20°C

Maintenance Oil may be used for the maintenance of all oxidative oiled wood surfaces and is especially suitable for the regular maintenance of oiled wood floors. In addition to being very easy to use and assuring minimal product waste, the maintenance oil refreshes the natural, warm glow of the wood and increases resistance to stains and waste. Maintenance Oil is suitable for both manual and machine application to oiled floors.

Worksteps

Instructions
Products in use
Product, room and floor temperature should be between 15–35°C. Ensure good ventilation at all times during the application and drying time. Clean the floor with WOCA Intensive Wood Cleaner. Leave the floor to dry for at least 8 hours. The floor must be completely dry.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Clean the floor with 125 ml Intensive Wood Cleaner mixed into 2.5 L water. Leave the floor to dry for at least 7-8 hours. The floor must be completely dry.
  2. Shake the container well before use.
  3. Apply approx. 1 dl of Maintenance Oil per 4 m² floor using a pad, short-bristled paint roller (3-4 mm) or a polishing machine with a white or beige pad on slightly larger areas.
  4. It is important that Maintenance Oil is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform.
  5. Wipe down the floor with clean, dry cotton cloths before proceeding with the next section of floor to be finished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
  6. Continue stepwise till the floor has been finished.
  7. When polished with polishing machine the floor will be pre-hardened after 4 hours and may cautiously be taken into use. Manually polished floors may be taken into use after 24-48 hours. Do not expose the floor to water during hardening time of .
Do not clean the floor or expose it to water during the first 3 days, while the oil is curing.