Panel White is a water-based product for the lightening up of yellowed wood, e.g. ceilings and wall panels. Panel White is used indoors for untreated and lacquered softwood.
The wood must be clean and completely dry. Wash with Intensive Wood Cleaner mixed with water in the ratio 1:40. Wipe off with clean water. Loose lacquer remains of earlier lacquered surfaces must be removed.
The wood must be clean and completely dry. Wash with WOCA Intensive Wood Cleaner mixed with water in the ratio 1:40. Wipe off with clean water. Loose lacquer remains of earlier lacquered surfaces must be removed. It is recommendable to make a small test with the product on a less conspicuous place to evaluate the result.
Stir the Panel White carefully before and during use. Buckets with different batch numbers should be mixed before use to avoid differences in shade and gloss.
Apply the product with a brush in an even layer lengthwise the wood grain. Do not apply on more than 3-4 boards at the time and finish them to avoid overlaps.
Clean tools with water and soap.
The treated wood surface may be cleaned with Intensive Wood Cleaner mixed with water in the ratio 1:40. It is recommendable to use a hard wrung cloth.
|Declaration:||Water, alkyd dispersion, pigments.|
|Colours||White and Extra White|
|Drying time||Approx. 2 hours.|
|Application tools||Wide brush for lye or water-based products. Small round brush for profiles and edges.|
|Cleaning of tools:||With water and soap|
|Disposal||Dispose of contents/container to an approved waste disposal plant.|
|Shelf life||3 years|
|Packaging||0.75 L - 2.5 L|