Pre-Colour is a water-based stain for unfinished and sanded interior wood surfaces, such as floors, stairs, furniture and panels. The stain colours the wood and enhances the natural wood grain.
Product, room and floor temperature must be between 15-25°C. Wood humidity must not exceed 12%. Ensure good ventilation during application and when drying. The wood must be newly sanded, use grit 100-120 for the final sanding. Vacuum thoroughly. Clean the wood with WOCA Intensive Wood Cleaner and leave it to dry for at least 8 hours before applying the stain.
Thoroughly shake the container of Pre-Colour, both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.
Apply an even coat of undiluted stain along the wood grain with WOCA Applicator. A more uniform colour is obtained if the wet stain is polished into the wood using a polishing machine and a beige pad. Use at least 1 L of Pre-Colour per 10 m2. On vertically mounted wood, apply from top to bottom. Leave the surface to dry for 8-12 hours.
Sand with a green pad to obtain a smooth surface and vacuum thoroughly.
The surface must be finished using one of WOCA’s oils, following the product instructions.
|Colours||White, Grey, Black and Brown|
|Drying time||8-12 hours at 20°C|
Applicator 9”, #880151
Telescopic rod, #599651
|Cleaning of tools:||With water|
|Disposal||Dispose of contents/container to an approved waste disposal plant.|
|Shelf life||3 years from manufacturing date if unopened|
|Storage||+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer (max. +25°C).|