Driftwood Lye is a unique, water-based product, which gives the wood a weather-beaten patina. The product is primarily for oak wood. By using this product, the wood will get a very nice two-dimensional design. Finally, the surface must be treated with one of the WOCA oils.
The unfinished woodwork must be clean, dry and finely sanded (grit 100-120) before applying the lye.
Shake the container well and pour the lye into a plastic bucket. It is important that no pigments are left in the container. Stir regularly during the application to prevent the pigments from settling to the bottom.
Apply an even coat of the lye with the WOCA Applicator, a nylon brush or roller lengthwise along the grain. Apply at least 1 L of lye per 10 m² of wood. Leave wood to dry for approx. 8-12 hours at 20°C.
De-nib standing fibres and remove excess pigments with a medium e.g. green or bordeaux, sanding polishing pad. Remove the sanding dust with a vacuum cleaner.
Finish the wood surface with a WOCA oil.
Product properties | |
Solid content | |
pH-value | 13-14 |
Declaration: | Sodium hydroxide, water, white pigments. |
Form | |
Appearance | |
Flash point | |
Density | 1.07-1.16 |
Gloss | |
Weight | |
Fully hard | |
Viscosity | |
Mixing ratio | |
Coverage | |
Colours | White and grey |
Odour | |
Binder | Sodium hydroxide, water, white pigments. |
Humidity | |
Dilution | |
Sandable after | |
Re-treatment dry | |
Drying time | 8-12 hours. |
Application tools |
WOCA Applicator, a nylon brush or roller Plastic bucket |
Pot life | |
Safety | |
Cleaning of tools: | WIth water |
Disposal | Dispose of contents/container to an approved waste disposal plant. |
Shelf life | 3 years |
Packaging | 2.5 L |
Pack size | |
MAL-code | |
Pr. No. | |
Storage | +10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer. |