Hardwax Oil Swift

Item number:

Oiling and waxing of wooden floors

  • Does not need to be polished into the wood
  • Resistant to liquids such as water, coffee, tea and red wine
  • Resistant to scratches and marks
  • Gives the wood a natural appearance and breathable surface
  • Easy to maintain using associated care products
  • High coverage

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

*The wood sample is shown on oak
2.5 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

510 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

20 m²/L

Colours:

Colourless - Matt

Cleaning of tools:

Use WOCA Solvent

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

2.5 L

Viscosity:

30-35 Sec. DIN Cup 4

Odour:

Strong

Solid content:

40-50%

Drying time:

4-5 hours at 20°C

Recommendation:

Lower temperatures and/or higher humidity can extend drying time. Do not expose the floor to water or clean it for the first 7 days while the oil is hardening.

Fully hard:

7 days at 20°C

Hardwax Oil Swift is a quick drying roll-on product for the oil treatment of wooden floors. It is incredibly easy to apply, since it does not need to be polished into the wood. Hardwax Oil Swift combines natural oil and wax in a single product, ensuring an extremely robust surface with high resistance to spills and stains. It gives the floor a neutral appearance and a comfortable non-slip surface that is easy to maintain. The product is suitable for base treatment of untreated, new or newly-sanded wooden surfaces, or as a topcoat on top of WOCA Master Colour Oil.

Worksteps

Instructions
Products in use
It is important that the product, the room and the floor are at a temperature between 15 °C and 30 °C and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. Always remember to test on a less visible spot to check the compatibility of the wood with the oil. The floor must be free of dirt, grease, wax and sanding residue. Previously treated floors should be sanded down to bare wood with grain 100-150. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Hardwax Oil Swift should be stirred thoroughly before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.
  2. Apply a thin layer of oil using a short-bristled paint roller (3-4 mm) or similar, along the grain of the wood. Distribute the oil thoroughly.
  3. Leave the floor to dry for 4-5 hours at 20°C. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time.
  4. Repeat the treatment within 24 hours if another coat of oil is required. A single coat of oil is normally enough for previously-oiled surfaces.
The newly-oiled floor can be used with caution the following day and is fully hardened after 7 days under normal indoor conditions. After 7 days the floor can be cleaned with WOCA Natural Soap or WOCA Oil Refreshing Soap, which gives the surface extra protection.For optimal adheasion floors previously treated must be intermediate sanded using a bordeaux pad before applying a layer of Hardwax Oil. Workstep 2 and 3 must be repeated within 24 hours if a second layer of oil is required.

Products you need

  • Intensive Wood Cleaner
    Prepare
    Intensive Wood Cleaner

    Treatment preparation

  • Teleskopskaft
    Telescope Stick

    For optimum reach

  • Paint Roller Cylinder, 4 mm
    Paint Roller Cylinder, 4 mm

    For water and solventbased oils

Related products

View in same category
+5

Master Colour Oil

Oiling of wooden floors

Wood Lye

Minimizes yellowing of the wood

Driftwood Lye

Gives oak a weather-beaten patina

Antique Oak Lye

Gives oak an ammonia-smoked look

Colour Tray

For 250 mm paint rollers