Oil Care

Item number:

Water-based revitaliser for oil-treated wood

  • Simple application both manually and by machine
  • Fast-drying
  • Water-based maintenance product
  • Indoor climate certified

*The wood sample is shown on oak

25 ML
1 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

15 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

0.95-1.00 g/ml.

pH-value:

pH 8-9

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colours:

Natural, White

Cleaning of tools:

Use soap and water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L

Viscosity:

20-25 Sec. DIN Cup 4

Odour:

Faint

Solid content:

10-20%

Mixing ratio:

Ready to use. Do not dilute.

Drying time:

12-24 hours at 20°C

Light use:

3-4 hours at 20°C

Recommendation:

Do not expose the floor to water during hardening time.

Fully hard:

3 days at 20°C

Oil Care is a waterbased and indoor climate friendly maintenance oil that can be used on all oiled wood surfaces, oxidating as well as UV-/factory-oiled, and is especially suitable for the regular maintenance of oiled wood floors.

Worksteps

Instructions
Products in use
Clean the floor with Intensive Wood Cleaner mixed into water. Leave the floor to dry for at least 8 hours. The floor must be completely dry befor treatment.Product, room and floor temperature should be between 15-30°C. Ensure good ventilation at all times during the application and drying time.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Clean the floor with WOCA Intensive Wood Cleaner. Leave the floor to dry for at least 8 hours. The floor must be completely dry.
  2. Shake the container carefully. Polish in a thin layer of theOil Care with a white pad, cotton cloth or use polishing machine for large surfaces. It is important that the Oil Care is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform.
  3. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
  4. Work in smaller areas one step at a time until the floor is finished.
  5. After 12-24 hours at 20°C, the floor can be used with caution. Do not expose the floor to water during hardening time – approx. 3 days at 20°C.