Wood Stain Remover effectively dissolves grease, redwine, coffee, tea etc. May be used on unfinished, soaped, oiled or waxed interior surfaces. Wood Stain Remover is based on soap and specially developed for indoor use to remove spots from oiled wood surfaces.
Before using Wood Stain Remover it is advisable to make a small test at a non-visible place of the floor to insure that there will be no undesired reaction.
Spray Wood Stain Remover evenly on the stain directly from the bottle.
Leave the Wood Stain Remover to dissolve the stain for 10-20 min.
Now scrub with a brush till the stain has been dissolved.
Wipe with cloth wrung in luke-warm water.
Repeat operation if necessary.
When the floor is completely dry after 24 hours, apply the original surface finish, e.g. oil, wax or soap to re-establish the protection of the surface.
| Product properties | |
| Solid content | |
| pH-value | 10-11 |
| Form | Liquid |
| Appearance | |
| Flash point | |
| Density | 1-1.04 |
| Gloss | |
| Weight | |
| Fully hard | |
| Viscosity | |
| Mixing ratio | |
| Coverage | |
| Colours | Colourless |
| Odour | Faint |
| Binder | |
| Humidity | |
| Dilution | |
| Sandable after | |
| Re-treatment dry | |
| Drying time | Approx. 24 hours at 20°C. |
| Application tools |
Brush Cloth |
| Pot life | |
| Safety | |
| Disposal | Dispose of contents/container to an approved waste disposal plant. |
| Shelf life | 3 years |
| Packaging | 250 ml |
| Pack size | |
| MAL-code | |
| Pr. No. | |
| Storage | +10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer. |
